healeys
[Top] [All Lists]

Re: [Healeys] front end removal problem

To: Austin Healey <pajtamuvek@gmail.com>, healeys@autox.team.net
Subject: Re: [Healeys] front end removal problem
From: Richard Dryman <rdryman1@yahoo.com>
Date: Fri, 3 Dec 2010 11:48:29 -0800 (PST)
use a heat gun to 'peel up' from one side; be sure to either leave the tar or
use butyl electricans tape{ made for self vulcanizing} when re-installing;
 the 
purpose of all this stuff is to prevent galvanic corroding of the
aluminum 
(dissimiliar metals---acts as sacrificial anode).
________________________________
From: Austin Healey <pajtamuvek@gmail.com>
I
have problem with removing the front shroud. I is glued on the sheet metal
frame. How do we remove it? Heating?

thanks in advance!

Gergo
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>