Frank
If the dash support bracket in question is a long bracket , about 1/2 inch
wide with formed ends....it mounts between the air duct that crosses the
firewall and connects to the dash just to the left center of the tach. There
should be holes in the bottom lip of the dash.
My BJ7 has a 1/2 round bracket midway between the inner fender and the rear of
the door opening to fix the top assist spring.
Ken Mason
BJ7 in work
----------------------------------------
> From: logical2@hotmail.com
> To: healeys@autox.team.net
> Date: Wed, 10 Mar 2010 00:17:14 +0000
> Subject: [Healeys] BJ7 top and dash support
>
> I am assembling my BJ7 and I have a piece marked "dash support" I belive I
> see where the front end goes but where does the dash end attach to the
dash?
>
> I replace the sills on my car and I now have no idea where the two top
assist
> springs are attached at the bottom, can someone give me a hint?
>
> I know someone will come through with the answers and I am, as always very
> gratefull for the help.
>
>
>
> Thanks much,
>
>
>
> 62' BJ7
>
> 61' Bugeye
>
> 69' Midget
>
>
>
> Frank R. Edwards 570-784-4662 logical2@hotmail.com
>
>
>
> _________________________________________________________________
> Hotmail: Powerful Free email with security by Microsoft.
> http://clk.atdmt.com/GBL/go/201469230/direct/01/
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|