In a message dated 11/28/10 9:35:38 AM, healeys-request@autox.team.net
writes:
> Subject: Re: [Healeys] BN1 camshaft bearings
> To: <hstandfa@iinet.net.au>, healeys <healeys@autox.team.net>
> Message-ID: <COL106-W14A951713C8BB0B3E05402C0230@phx.gbl>
> Content-Type: text/plain; charset="us-ascii"
>
> Noel, Camshaft bearings are not made in other than the "standard" size.
> Get a
> another cam.
>
> Richard Mayor
> BN7L-466 Vintage Racer
> Portland, Oregon
>
>
>
>
> > Date: Sat, 27 Nov 2010 14:11:37 +1000
> > From: hstandfa@iinet.net.au
> > To: healeys@autox.team.net
> > Subject: [Healeys] BN1 camshaft bearings
> >
> > I am restoring a 1954 BN1 and my engine rebuilder advised me I need 10
> > thou under cam bearings as the cam journals have about 8 thou wear and
> > require grinding, I can only find standard bearing sets listed with the
> > usual suppliers but I believe oversize bearings are made somewhere, can
> > anyone help with a supplier?
>
Not only should you get another cam, but you might seriously consider
getting a LeMans-spec cam. Roger Moment has fitted one to his BN1 and is very
pleased with the additional power and responsiveness due to the better
breathing.
Cheers
gary
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|