Bill -
I was thinking of using a lip seal, but I seem to recall that someone
mentioned that pressure will build up in the box when it is warm and
then oil will leak out the selector shaft and side cover area,
possibly, but I can't be sure. It would be great if someone knows.
Alan
On 11/13/10, Mr. Bill <bn1@pacbell.net> wrote:
> Alan, List,
>
> What kind of seal are you contemplating? In 1998 I had the gearbox front
> cover machined out and an O-ring inserted to seal on the first motion
> shaft. I have had no problem whatsoever with several thousand miles of
> driving. I have inquired but never really received a solid answer as to
> the downside of doing this. Perhaps your question will promote a good
> discussion.
>
> Bill
>
>
> On 11/12/2010 4:49 Big Blue, Alan Seigrist wrote:
>> All -
>>
>> I am considering putting a front seal on the gearbox of my BN1. There
>> have
>> been some "mixed" opinions on this list before, anyone recommend or not
>> recommend doing this? I live in a hilly place so the front screw seal
>> does
>> leak alot of fluid over time.
>>
>> Thanks for your thoughts about this.
>>
>> Alan
>
> When I was younger, I could remember anything whether it had happened or
> not. But now my facilities are decaying and soon I shall be so I cannot
> remember anything but the things that never happened. - Mark Twain
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
--
Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|