They're called 'ratio adapters.' Lots of speedo shops sell them.
bs
On 11/12/2010 7:10 PM, Jonas Payne wrote:
> When I restored my 1st Morgan, (it was a +4, which should have had a TR
>engine, but instead had a 2.0L Ford), there was a device installed on the on
>the speedo cable between the trans and speedo with little watch like dials.
>Apparently is was some sort of " transmission" that allowed one to slow or
>speed up the cable between the trans and speedo, therefore allowing
>incremental adjustment of the ratio, and allowing the proper adjustment of the
>speedo to the proper rear end/tire& wheel size.
>
> I assumed it was a Ford part, I think it's sitting in a box somewhere. Given
>the number of people I know with "hot rod" 4x4's I assumed it was standard
>equipment for guys when they wanted to fit oversize wheels and what not.
>
> Anybody ever seen such a device?
>
> Jonas Payne
>
>
--
*******************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
*******************************************************************
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|