My parts book does not show the bump box or the bolts/screws needed to attach
it to the wheel well.
I seem to recall that each box has two hex head bolts and two Phillips head
screws. Is this right or does it just have 4 hex head bolts as shown in the
Moss catalog.
If it uses Phillips head screws too, are these placed in the upper two holes or
into the lower holes near the seat pan floor.
Thank you,
John
'62 BT7
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|