The article on Pertronix wire chafing could be of interest to those with
Pertronix installed. I was concerned about this problem when I first
installed the unit on my Healey. My solution was to install a small wire
tie around the wires inside the distributor right at the 'grommet' . This
prevents the wires from ever being pulled through the grommet and rubbing
against the rotor.
(The Other) Len
Vacaville, CA, USA
1967 AH 3000 MkIII, HBJ8L39031
----- Original Message -----
From: "HealeyRick" <healeyrick@yahoo.com>
To: <healeys@autox.team.net>; <spridgets@autox.team.net>
Sent: Saturday, October 30, 2010 3:00 PM
Subject: [Healeys] Soda Blasting Small Parts
> Saw this cheap DIY soda blaster on another forum. Looks like it works
> great
> for carbs: http://www.aircooledtech.com/tools-on-the-cheap/soda_blaster/
>
> Rick
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|