Rust is the problem with this joint, not corrosion! Paint the mating
surfaces well. I also ran caulk on the seam, feathered it out and
finished it with paint. It's not perfectly finished and I doubt it's
Concours either.
John
At 08:59 AM 10/15/2010 +0200, Jaap Aeckerlin wrote:
>Bob, you have to realise that electrolytic corrosion only takes place when
>the relative humidity at the joint is over 50%. Any permanent elastic mass....
>Jack Aeckerlin, The Netherlands
>1964 BJ8 29432
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|