Looks like it's not all the way into the 180 degree offset slot. Yeah, I
know, simply state the obvious.
Rich
--------------------------------------------------
From: "Tadeusz Malkiewicz" <tadeusz.malkiewicz@plusnet.pl>
Sent: Friday, September 10, 2010 2:43 PM
To: <healeys@autox.team.net>
Subject: [Healeys] Distributor on the 100 engine
> A small question here..:
>
> My engine is finally painted with the gearbox painted and I tried to mount
> the distributor, but is does not want to sit all the way in. There is
> about
> 5mm gap:
> http://picasaweb.google.pl/Volvo1800S/HealeyEngine#5515356135052686962
> or http://tinyurl.com/2v9xrtc
>
> Anyone has any idea what the problem is?
>
> It was rebuild by Advanced Distributors.
>
> Tadek
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|