Charlie -
I would not recommend any modern type wire set for any Healey unless
you purchase a TR6 dizzy cap (fits on BJ8 dizzy) or replace the dizzy
with a Pertonix/123/Mallory dizzy.
Your best bet is to make up your own wires using bumblebee wire or any
other solid metal core wire. The cap on the 6-cyl works best with
solid metal wire core. If it's any kind of suppressed wire it will
fail with that screw cap.
Alan
On 8/1/10, Charlie O'Connors <charlieoc@comcast.net> wrote:
> I want to replace the ignition wire set on my 1960 BT7. I was looking at
> the Cobalt set sold by Moss as well as the Magnecor wire sets, but they
> appear to be more for later model 3000s. Any suggestions on ignition wire
> sets for the 1960 Austin Healey?
>
>
>
> Charlie O'Connors
>
> Havana, Florida
>
> 1960 Austin Healey 3000 BT7
>
> 1960 Austin Healey Sprite
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
--
Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|