I meant where the outriggers meet the chassis rails, and spread the load
with some on the chassis rails and some onto the root area of the
outriggers. All those vertical sections coming together will take the full
weight spread over the immediate area.
Rich
--------------------------------------------------
From: "Bob Johnson" <bjsbj8@gmail.com>
Sent: Sunday, July 18, 2010 12:53 PM
To: "Rich C" <richchrysler@quickclic.net>
Cc: <healeys@autox.team.net>; <npaul72464@aol.com>
Subject: Re: [Healeys] frame lifting points
> Rich,
>
> I'm sure you mean on the main chassis rails where the outriggers meet
> the main rails, just in case someone thinks you mean on the outriggers
> at those points. Right?
>
> Bob Johnson, in obvoiusman disguise
> BJ8
>
> On Sat, Jul 17, 2010 at 7:08 PM, Rich C <richchrysler@quickclic.net>
> wrote:
>> Hi Ned,
>>
>> I'd suggest you lift at the points where the outriggers meet the main
>> chassis rails both front and rear.
>>
>> Rich
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|