Bob,
These bolts are indeed 1/4 BSF and about 3/4 of an inch in length, however
they are quite unique in that the bolt heads are almost half the thickness
of a standard bolt head. This is so the bolt head would not protrude too
much under the Armacord that covered them. As I recall the originals on my
BN1 had the "WILEY" vendor name on them.
Now how's that for Concours trivia :-)
Cheers,
Curt
On Mon, Jul 5, 2010 at 10:53 AM, Bob Haskell <rchaskell@earthlink.net>wrote:
> Listers,
>
> The fuel pump mounting screws are part number 6K 9431. What's the thread?
> 1/4 BSF?
>
> Cheers,
> Bob
>
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|