I am experiencing problems with my (suspect) Master Cylinder on my BN1
With the Master Cylinder on the bench in a vise with the reservoir
connected
to inlet with oil in it and the outlet connected to a pipe which is
blanked of
there is hard pressure. When fitted back to car there is no pressure when
attempting
to bleed brakes all the wheel cylinders are new.I feel sure the problem is
in the Master
Cylinder but lost for answers
Regards Keith
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|