Looks like the rich needle would run the same at idle/low RPM.
Thanks,
Bob
--------------------------------
Bob Spidell - San Jose, CA
I just checked the application lists for BJ8, The "standard" needle is
a UH, the rich needle is UN.
UH UN
.124 .124
.104 .1006
.084 .0806
Wilko
On May 7, 2010, at 1:46 PM, Dan Stromquist wrote:
> Bob:
> I asked the same question and was told the needle circumference
> enriched the
> mixture only at higher RPMs and that at idle or near idle the needle
> was the
> same as standard.
> Dan
>
>
>
> -----Original Message-----
> From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net
> ]
> On Behalf Of Bob Spidell
> Sent: Thursday, May 06, 2010 4:24 PM
> To: healeys@autox.team.net
> Subject: [Healeys] dumb question ...
>
> A 'UN' (rich) SU needle should enrichen the mixture compared to a
> standard
> needle, correct?
>
>
> bs
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|