POR15 works on STDs? Must be an off-label application.
bs
Chris Dimmock wrote:
> Hi Alan,
> POR15 kit works fine, PROVIDED you follow the instructions AND make
> sure you eg grease any threads in the tank (eg drain plug, sender etc)
> and blow the fuel pickup with low pressure air (repeatedly) BEFORE the
> POR sets (ie when the POR is still wet). Otherwise, you won't get your
> drain plug out if you left it in; and if you block the fuel pickup
> with POR, clearing it after the POR has set is probably not easy....
> Worked fine for me when I had a STD tank in the BJ8
> Chris
>
>
--
*******************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
*******************************************************************
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|