Re: [Healeys] Drive shaft alignment

["Ed Woods" <fogbro1@comcast.net>]

List,

Quoting from The Good Book, a.k.a the 3000 Service Manual,: "When replacing 
the sliding joint on the shaft, be sure that the trunnions in the sliding 
and fixed yoke are in line.  This can be checked by observing that arrows 
marked on the splined sleeve yoke and the splined stub shaft are in line."

Ed Woods 
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums