I did it about 10 yrs ago and it's still there. I used broad stick-on Velcro
and it worked fine.
Simon
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Mark LaPierre
Sent: 23 April 2010 00:33
To: healeys@Autox.Team.Net
Subject: [Healeys] Armrest Pad again
Has anyone tried to use Velcro to secure their armrest for a BT7 Healey.
The
sewing operation
would seem to be very fiddly to me. Not to mention a "hit or miss"
operation to get it exactly in the middle . With Velcro it would seem
that
the pad could be moved around more. I'm just
not sure how secure one can get it with Velcro so it stays in place. I was
thinking Gorilla glue on the bottom of the pad for one side of the Velcro
and
trying to stitch the other half of the Velcro to the carpet.
Has any one tried this or any other ideas?
My pad from Heritage isn't very flexible on the bottom and I'm not sure it
would be an easy task to get it to fit to the contour of the trany tunnel
with
a needle and thread.
Mark
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/simon.lachlan@homecall.co.uk
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|