healeys
[Top] [All Lists]

Re: [Healeys] Conversion to BJ8 calipers

To: richard mayor <mayorrichard@hotmail.com>
Subject: Re: [Healeys] Conversion to BJ8 calipers
From: "Eric (Rick) Wilkins" <e-wilkins@cox.net>
Date: Mon, 19 Apr 2010 17:58:14 -0700
Would the caliper brackets from a BJ8 fit the earlier spindle?

On Apr 19, 2010, at 5:29 PM, richard mayor wrote:

> The quick answer is NO.  The early 3000 calipers (type 14) have a  
> distance of  3-1/4" between the mounting hole centers. The BJ8  
> calipers (type 16) are 3-1/2" center to center.
> Having said that, one could plug the holes on the early 3000 caliper  
> mounting brackets, re-drill and tap the brackets for the BJ8  
> spacing. The early and late rotors are the same diameter but the BJ8  
> rotors are 1/2' thick while the early rotors are only 3/8" thick.
>
> Richard Mayor
> BN7L-466  Vintage Racer
> Portland, Oregon
>
>
>
>
> > From: e-wilkins@cox.net
> > Date: Mon, 19 Apr 2010 09:27:18 -0700
> > CC: Healeys@autox.team.net
> > Subject: Re: [Healeys] BT7 Brake Calipers
> >
> > On the subject of BN7/BT7 type calipers, is there an available
> > conversion to BJ8 type brakes that doesn't involve all new spindles
> > and hubs?
> >
> > Thanks
> >
> > Wilko
> > San Diego
> >
> > On Apr 19, 2010, at 8:19 AM, Jonas Payne wrote:
> >
> > > I need a set of rebuilt / core BT7 brake front brake calipers.
> > _______________________________________________
> > Healeys@autox.team.net
> > Donate: http://www.team.net/donate.html
> > Suggested annual donation $12.75
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/healeys/mayorrichard@hotmail.com
>
> The New Busy is not the old busy. Search, chat and e-mail from your  
> inbox. Get started.
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>