I would suggest a few strips of double sided adhesive tape, the kind
with a foam layer of about 1mm. Easy to remove if wanted with a
hairdryer and you can remove the residue with a bit of white spirit. Use
good quality tape (e.g. 3M) as some lesser quality stuff tends to
disintegrate or become undone under heat from the sun.
Kees Oudesluijs
NL
Jaap Aeckerlin wrote:
> Hi all,
> would suction cups be a solution? I bought a third brake light in the USA,
> only to find out it was a rigid construction which could not be bent to
> follow the shape of the body. I ended up fitting the brake light in my daily
> car, a Citrokn Break, but I still keep thinking about a possibility to mount
> a third brake light onto my BJ8 without drilling holes.
> Has anyone on this list ever used soft pvc suction cups to hold something
> onto a driving car?
> Jack Aeckerlin, The Netherlands
> 1964 BJ8 29432
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|