healeys
[Top] [All Lists]

Re: [Healeys] BN2 balljoint crosstube- tight nuts

To: allen c miller jr <acmiller@mhcable.com>
Subject: Re: [Healeys] BN2 balljoint crosstube- tight nuts
From: Oudesluys <coudesluijs@chello.nl>
Date: Sun, 04 Apr 2010 17:14:43 +0200
Use new castle nuts. The old ones are probably rusted and deformed when 
the tapered joints were knocked out using a dirty big hammer on the 
halfway turned out nuts. You are lucky that appearantly the male threads 
survived.
Kees Oudesluijs
NL


allen c miller jr wrote:
> Help!
>
> I have two cross tubes, four balljoints, and seven castle nuts, and all the
> necessary rubber blouses to make one usable cross tube assembly. The nuts are
> all clean, as are the threads on the ball joints. all are from pre-BJ8 Healeys
> with apparently matching threads. The castle nuts thread down 4 turns apiece
> +/- half a turn, but won't go further and tend to turn the ball in the joint.
> How do you tighten them without breaking the rubber lubrication blouses? It
> appears the nuts were threaded from both sides with a 'waist' just below the
> castellations.
>
> all suggestions appreciated
>
> thanks
>
> allen miller bn2/m
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
> ------------------------------------------------------------------------
>
>
> Geen virus gevonden in het binnenkomende-bericht.
> Gecontroleerd door AVG - www.avg.com 
> Versie: 9.0.800 / Virusdatabase: 271.1.1/2789 - datum van uitgifte: 04/04/10 
>08:32:00
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>