Andy,
Answer to #2 question.....The blanking plate is trimmed with the same vinyl
as the console and sits framed by a rectangular chrome surround. The 3000
emblem is fitted to the face of the vinyl and a push nut holds it against a
bridging bracket on the back side.
Rich
--------------------------------------------------
From: "andy pole" <ampole@hotmail.com>
Sent: Thursday, February 18, 2010 3:21 PM
To: <healeys@autox.team.net>
Subject: [Healeys] bj8 centre console and ash tray
> Guys
>
>
>
> Two questions please:
>
> On the chrome ashtray there is a spring holding the lid, one end attaches
> to
> the lid bracket, where does the other end go, I have a hole in the ash
> tray
> body, does it just hook in the hole or should there be a small pin that
> might
> have disappeared when I had my chrome done?
>
>
>
> If a radio is not fitted, what does the cover plate look like, is it just
> vinyl covered with the 3000 flash on, and does it have an edging trim?
>
>
>
> many thanks Andy
>
> _________________________________________________________________
> Send us your Hotmail stories and be featured in our newsletter
> http://clk.atdmt.com/UKM/go/195013117/direct/01/
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive
[demime 1.01d removed an attachment of type image/jpeg which had a name of Greg
Grant 064.jpg]
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|