Many thanks for all replys - the OD is being rebuild - is there anything
special about sealing it?
Thanks, Tadek
-----Original Message-----
From: Ed Woods [mailto:fogbro1@comcast.net]
Sent: Friday, February 12, 2010 12:55 AM
To: Tadeusz Malkiewicz
Subject: Re: [Healeys] Overdrive rebuild - how to get rid of the oil leak on
the operating shaft?
There are 'O' rings on both ends. Replace both.
However, these points rarely leak. Look for another source, like the plug on
the operating valve.
Ed Woods
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|