Float chamber lever is cutting off the fuel at too high a level,
causing overflow. Must be set with 7/16" dowel per the SU
instructions.
On 1/28/10, Oudesluys <coudesluijs@chello.nl> wrote:
> Most probably.
> Kees Oudesluijs
>
>
> Paul Leeks schreef:
>> Chaps
>>
>>
>>
>> Yes, I soaked the cork seals in engine oil for 24 hours and double checked
>> that the chamfered brass washers (above and below) were sited the right
>> way
>> round.
>>
>>
>>
>> Can I just check that, even though the fuel seems to be leaking from the
>> main
>> part of the carb, most folks thinks it is almost certainly due to a leak
>> back
>> in the float chamber (needle valve or float)?
>>
>>
>>
>> Thanks again
>>
>> Paul
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
>
--
Sent from my mobile device
Alan
'52 A90
'53 BN1
'59 Jag Mk IX
'64 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|