I always have new foams installed in the seats I get built up at Heritage
Upholstery & Trim, and I believe they get them from BCS. However, I still
get them to have the relief holes drilled into the undersides of the middle
cushion portion. In addition extra wadding and building up around the
bolsters (as original) is required for the best fit and finish. There is on
the spot final sewing required on the outer ears of the Hundred and
Longbridge 100/Six series seats to finish the piping and hidem strip. That's
why I always have the professionals (Heritage) do them for best results.
Rich Chrysler
----- Original Message -----
From: "Carr&Edwards" <scvc70@epix.net>
To: "Healey List" <healeys@autox.team.net>
Sent: Tuesday, January 26, 2010 2:00 PM
Subject: [Healeys] seat foam - BN1
> Listers,
>
> There's nothing in the archives since early 2008 on whose seat foam (Moss,
> VB,
> BCS) fits best. Anyone have more recent experience with fitting new foam
> to a
> BN1?
>
> Sarah Carr
> BN1 in PA
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|