I have a neighbor with a Tri-carb. It might be a while before I see his car
though (he doesn't store it at his house). If someone wants to do a pencil
sketch with the dimensions, I can do up a drawing like the BJ8 ones.
-----Original Message-----
Somebody needs to come up with the pattern for the tricarb under floor heat
shield panel. It's similar to that of the BJ8 but is about 5 1/2" longer at
the back of the panel with different spacings. I suspect the one for the BJ7
may be similar. The BJ8 one probably had to be shorter at the back edge to
clear the pair of exhaust mounts that mount on studs through the floor just
ahead of the rear left outrigger.
Rich Chrysler
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|