This was a post by Bob Haskell and a couple of comments a few months ago
about using a gasket from the "Help" section of the auto parts stores-
"The no splash 'gasket' that Moss sells (582-505) for the brake fluid
reservoir is Dorman Help! part number 42072 for various GM models
2004-1987. Might be available at your local auto parts store.
Bob"
this link was also posted for info:
http://www.mossmotors.com/graphics/products/PDF/582-505.pdf
Our local Autozone had the gasket. It did require a slight trim around the
edge to fit in the cap.
Dallas
----- Original Message -----
From: "Freese, Ken" <Kendall.Freese@Aerojet.com>
To: "Healeys" <healeys@autox.team.net>
Sent: Wednesday, December 23, 2009 12:30 PM
Subject: [Healeys] Brake reservoir slosh
>I think there was a tech tip not too long ago on making a new gasket to
> prevent sloshing of the brake fluid out the cap breather hole.
> Does someone remember that?
> Thanks,
> Ken Freese
> 65 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as dcongleton@embarqmail.com
>
> http://www.team.net/archive
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.430 / Virus Database: 270.14.117/2583 - Release Date: 12/23/09
08:28:00
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|