Rick
Just confirmed with my old HD6s. That part on the bottom is part of the
electric/thermo choke set up. When I removed the chokes from mine,I also
removed this part and blanked off the holes left in the base plate. If you
look at the photo from Bobs-services, you will note the black control box
(solenoid) between the two carbs
John Rowe
Qld Australia
BN1 BT7
-----Original Message-----
From: Eric (Rick) Wilkins [mailto:e-wilkins@cox.net]
Sent: Tuesday, 1 December 2009 9:25 AM
To: John & Kerry Rowe
Cc: 'Healeys List'
Subject: Re: [Healeys] 100-6 HD6 Carb?
Sorry wrong link:
http://www.bobs-services.de/archiv/su_h6_jagxk120_640.jpg
The ebay carb has the added nut under the jet housing. HD6 don't have
that.
On Nov 30, 2009, at 3:19 PM, John & Kerry Rowe wrote:
> Picture too small to make any sense out of.
> The carb is identical to the ones off my early BT7(one fitted with
> thermo
> chokes). The 4 screws denote a diaphragm. The H6 have an adjustable
> jet with
> a brass nut which moves the jet up or down
> -----Original Message-----
>
> From: healeys-bounces@autox.team.net
[mailto:healeys-bounces@autox.team.net
> ]
> On Behalf Of Eric (Rick) Wilkins
> Sent: Tuesday, 1 December 2009 8:46 AM
> To: Healeys List
> Subject: Re: [Healeys] 100-6 HD6 Carb?
>
> I know it's not an HD6. Notice the extra stuff under the diaphragm
> housing.
>
> It looks more like an H6. Like these:
>
> http://www.bobs-services.de/archiv/su_h6_jagxk120_80.jpg
>
> Look at the very bottom under the diaphram housing.
>
> On Nov 30, 2009, at 1:46 PM, John & Kerry Rowe wrote:
>
>> The carb is a HD6 . I believe the "d" stands for "diaphragm". They
>> are
>> interchangeable from side to semidown by use of different float
>> bowls.
>> John Rowe
>> Qld Australia
>> BN1 BT7
>>
>> -----Original Message-----
>> From: healeys-bounces@autox.team.net
> [mailto:healeys-bounces@autox.team.net
>> ]
>> On Behalf Of Eric (Rick) Wilkins
>> Sent: Tuesday, 1 December 2009 3:33 AM
>> To: dwflagg
>> Cc: healeys@autox.team.net
>> Subject: Re: [Healeys] 100-6 HD6 Carb?
>>
>> IMHO, That carb is as listed.
>>
>> An HD6 is angled. Supposedly the "d" means downdraft (semi).
>>
>> On Nov 29, 2009, at 3:23 PM, dwflagg wrote:
>>
>>> Look at eBay item #180437624761. It is listed as an HS6, but has the
>>> bowl
>>> attached with 4 bolts and looks like an HD6. If you need one, that
>>> may be
>>> it. The usual disclaimer of having no financial interest, etc..
>>>
>>> Doug
>>> ____________________________________________________________
> :
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|
