Can't you adjust the engine support rubbers in such a way that the
engine will sit back another 20mm or so?
The way it is now (less than 15mm clearance I suppose) the crank bolt
may touch the cross member while driving, hitting the brakes or a bump
on the road.
Kees Oudesluijs
> I'm trying to put a fan belt on the BT7 that I'm restoring and there
> doesn't appear to be enough clearance between the cross member and the bolt
>on
> the end of the crank.
>
> I'm guessing that I should jack the engine up a little bit to create enough
> clearance but don't want to damage anything. Any recommendations?
>
> Thanks,
> Phil
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as coudesluijs@chello.nl
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|