Hello all,
Any one have a left front fender for sale? the only portion that needs to be
good is from the center of the fender well forward.
Please contact me off line.
Thanks,
Jerry Rude
Prather California
g.rude@att.net
----- Original Message -----
From: Gerald Rude
To: healeys@autox.team.net
Sent: Saturday, November 28, 2009 8:22 PM
Subject: Inner fender to fender spacing
Hi all,
I'm fitting the fenders to the car, and the left inner fender well seems to
have too much space between the lip to the fender. The fender stands at about
1 inch. I compared dimensions to the other side, and the fender well is short
by 1 inch. This is the side that had the big shunt, and the frame had to be
replaced from the firewall forward on this side. Anyway, the old inner fender
well was used, but I've tried to pull it outward, and have managed about 1/2
inch but I still have a 1 inch gap. If I pull if further out, I will have to
reposition the upper shroud bracket on the fender well. So my options right
now are to continue pulling, and reposition the shroud support and possibly
the inner shroud support which attaches to the inner fender well or cut and
splice in a section of sheet metal.
Is it necessary to have a small gap, say 1/4 inch or so? That is what the
right side has, which was never in an accident.....Or can I get by with the 1
inch gap....??
any help much appreciated.
Jerry Rude
BJ8
----- Original Message -----
From: Gerald Rude
To: healeys@autox.team.net
Sent: Friday, July 14, 2006 6:20 AM
Subject: Desperately seeking shroud
Hello all,
I still am seeking (desperately) a front shroud for a BJ7/early BJ8.
Would any of you kind souls have one hanging in their garage which may be
repairable?? Or know of anyone who may?
Thank you so much,
Jerry Rude
Prather California.....
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|