healeys
[Top] [All Lists]

[Healeys] Blowing out brake/clutch lines

To: Healey list <healeys@autox.team.net>
Subject: [Healeys] Blowing out brake/clutch lines
From: Daniel and Diane White <dwhite4949@wowway.com>
Date: Tue, 17 Nov 2009 10:08:06 -0500
After following the recent discussion regarding silicone fluid I've 
decided to drain the silicone fluid from the brake /clutch system and 
replace it with fresh silicone fluid.  It's been in there for two years 
and I'm trying to avoid any corrosion in the system due to any water 
that may have found it's way in there due to humidity in the air.  
Question- How do I blow out the lines and brake and clutch master 
cylinders?  I'd like to keep the disconnecting to a minimum.  Is there a 
certain sequence? 
Thanks,
Dan White
1962 BN7 Mk II
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>