Erika's exhaust is bolted directly to the dog legs/frame with no rubber
dampers and causes on problems.
Vrooom vrooom,
John
----- Original Message -----
From: "Steve Gerow" <steveg@abrazosdata.com>
To: <healeys@autox.team.net>
Sent: Saturday, November 14, 2009 4:25 PM
Subject: [Healeys] Exhaust Hanger replacement
> Today I on returning from Early Rodders Cruise-In I noticed my exhaust
> system was nearly on the ground - all the bonded rubber exhaust hangers
> had
> separated except the one by the rear axle. The metal plates had come
> neatly
> un-bonded from the rubber blocks. The rubber itself is in good condition,
> but whatever the glue is they use has let go. I'm surprised my Monza
> exhaust
> didn't fall on the ground.
>
>
>
> Checking my records, I bought these new in May 2004. They lasted 5-1/2
> years.
>
>
>
> Does anyone know if there's a superior replacement available for these? A
> google search didn't turn up anything.
>
>
>
> If I have to buy Moss replacements, guess I'll drill each for a
> check-screw
> so at least my exhaust won't fall off the car on the highway.
>
>
>
> --
>
>
>
> Steve Gerow
>
> Pasadena, CA, USA
>
> BN6
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as bighealey@astound.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|