Who can provide the spring?
Rich Chrysler
----- Original Message -----
From: "andy pole" <ampole@hotmail.com>
To: <simon.lachlan@homecall.co.uk>; <healeys@autox.team.net>
Sent: Thursday, November 12, 2009 5:29 PM
Subject: Re: [Healeys] Brass
> Simon
>
>
>
> Mine was missing also, I think ahead4healeys and others sell the handles,
> but
> I just like you had a piece of brass rod and used a tap and die and also
> bench
> grinder to shape, looks as good as new after the clean with stainless
> spring
> and pin:
>
>
>
> http://www.austin-healey3000.com/apps/photos/photo?photoid=5125796
>
>
>
> http://www.austin-healey3000.com/apps/photos/photo?photoid=5125797
>
>
>
> I used a valve rebuilding paste from work, think it is graphite based. its
> not
> leaked yet!
>
>
>
> cheers Andy
>
>
> _________________________________________________________________
> Add your Gmail and Yahoo! Mail email accounts into Hotmail - it's easy
> http://clk.atdmt.com/UKM/go/186394592/direct/01/
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|