I think that you are right Ray - that is what I determined when I did the
windscreen on my BT7. I re-used the old screws where I could, using the
best chrome in the places where they can be seen.. I cannot recall what I
did for chasing the threads in the new brackets - I have a 4 BA tap and
likely used that, but I do not seem have made any notes, so I cannot be
sure. I would drill/tap a piece of scrap to check before working on the
corner brackets.
cheers,
Mirek
Ray Wrote: Hey guys, you know those little shallow angle flat head screws
that hold the
> corner brackets of a 100 windshield frame? What thread are they?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|