Tadek -
Seat slides and boot prop was zinc plated. The accelerator should be
gloss black. All the other stuff is gloss black.
You should get the Concourse guidelines and Gary Anderson's Book,
between the two most of this is covered, plus makes for good reading!
Alan
On 10/2/09, Tadeusz Malkiewicz <tadeusz.malkiewicz@plusnet.pl> wrote:
> Hello,
>
> This must have been taken a number of times before, but I have to ask:
>
> 1. What color is the gas pedal (mine was green)
> 2. what color are the seat rails
> 3. what color is the trunk support
> 4. What type of black is used on various parts like tank, fresh air inlet,
> seat pans, etc, etc?
>
> Best Regards,
>
> Tadek
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
>
--
Alan
'52 A90
'53 BN1
'64 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|