I used that type of material to line the underside of my tranny tunnel and
it works like a charm. I used a Thermal Smoker Jacket made for a CharBroil
smoker Model 418 6110 and used 3M 90 spray adhesive. The blanket is readily
available at local BBQ stores. Lots of cutting and fitting but an ice cube
wont melt on the tranny tunnel now. One of these days I will put it on the
underside to deflect the heat from the muffler. Darn, another winter project
is looming!
John Sims, BN6
Aberdeen, NJ
http://www.healey6.com
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Jody Kerr
Sent: Friday, September 25, 2009 10:45 PM
To: Mr. Bill
Cc: healeys@autox.team.net
Subject: Re: [Healeys] Insulation Recommendations
Is this what you're talking about?
http://www.cabelas.com/p-0005854516219a.shtml
If it is, I believe someone else has mentioned the same material, but
not under the same name.
Now, This is a curiosity point for me. These sorts of underlayments
(of any sort) are technically non-concours. If you're building a
concours car will you be detracted for adding these sorts of things?
Will someone check?
Jody
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|