Do you have the throttle switch adjusted correctly?
- Peter Schauss
1963 BJ7
1980 MGB
> -----Original Message-----
> From: healeys-bounces@autox.team.net [mailto:healeys-
> bounces@autox.team.net] On Behalf Of BJ8 Healeys
> Sent: Tuesday, September 15, 2009 10:08 PM
> To: healeys@autox.team.net
> Subject: [Healeys] Overdrive relay
>
> Hello, Healeyphiles -
>
> Just curious if anyone has ever taken apart an overdrive relay and
> understands the function of the piece that is attached to the upper end of
> the coil and zigs around to "restrain" the moveable contact in the opening
> direction?
>
> I have a used relay and a brand new Moss replacement (Made in the UK!)
> that
> works the same way out of the box. I am not getting a "latching" function
> to hold the overdrive engaged when I flip off the dash switch. The last
> time this happened, it was the relay, but this time a new one ain't fixing
> the problem. I think the part mentioned above is key to how the relay
> latches, but haven't quite got it scoped out yet.
>
> Thanks,
>
> Steve Byers
> HBJ8L/36666
> BJ8 Registry
> Havelock, NC
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as schauss@worldnet.att.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|