I remembered that there was a discussion about this a while back so I looked
it up in the archives. Two cures were suggested:
1. Drill and tap the hole/captive nut and install a helicoil.
2. Drill and tap for a 10 mm bolt.
The last time that I had this problem, 10+ years ago - on the other side, I
chose option 1 which required removing the shock. This time, I am thinking
about the 10 mm bolt option.
Can I do this without removing the shock?
Will I actually have to drill the shock and the captive nut to handle the 10
mm bolt or will the existing holes be large enough?
Thanks,
Peter Schauss
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|