Moss lists the Ezibleed kit as their part number 386-860 for $57.95.
This is all I've used for years and it always works extremely well. One tip,
instead of just taking normal tire pressure of 25 to 35 PSI from a spare
tire, I reduce the pressure to about 12 PSI. That way, if there's a leak you
won't end up with all sorts of aeration through the system and the entire
proces of bleeding the system will be gentler and much less mess.
Rich Chrysler
----- Original Message -----
From: "Don Day" <fsufan1952@yahoo.com>
To: <healeys@autox.team.net>
Sent: Saturday, September 05, 2009 2:42 PM
Subject: [Healeys] ezebleeder
> Does anyone have a good source for a ezebleeder system? The one I am
> looking for is the one that you use your spare tire for pressure.I used
> one a while ago and found it easy to use.Does anyone have any other one
> man system suggestions? i think I got it from Moss a long time ago.I just
> replaced all my lines with new stainless tubes,along with new master
> cylinders and had my power booster rebuilt.I going with synthetic.
>
> Thanks Don
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|