healeys
[Top] [All Lists]

[Healeys] Lead Hammer Molds

To: fandy@sbcglobal.net, bspidell@comcast.net, tomfelts@windstream.net
Subject: [Healeys] Lead Hammer Molds
From: wilkmanracing@aol.com
Date: Wed, 26 Aug 2009 12:06:43 -0400
Here's a link to a company that sells lead hammer mold kits in various sizes.? 
I assume the 4 pound hammer would be the one to buy for knock-offs.



Bill Wilkman

BT7

AN5


-----Original Message-----
From: Fred Anderson <fandy@sbcglobal.net>
To: Bob Spidell <bspidell@comcast.net>; Tom Felts <tomfelts@windstream.net>
Cc: healeys@autox.team.net
Sent: Wed, Aug 26, 2009 8:41 am
Subject: Re: [Healeys] hubs .. splines - autotightening



The September issue of Popular Mechanics as a story about making lead hammers 
and where to get the mold.Page 112. Fred?
----- Original Message ----- From: "Bob Spidell" <bspidell@comcast.net>?
To: "Tom Felts" <tomfelts@windstream.net>?
Cc: <healeys@autox.team.net>?
Sent: Wednesday, August 26, 2009 7:58 AM?
Subject: Re: [Healeys] hubs .. splines - autotightening?
?
>I get several years out of mine, but just throw them away when they get 
>>flattened.?
>?
> I've wondered if it wouldn't be possible to 'recycle' them; i.e. melt the > 
>lead and remold it (some of the lead chips off, but you'd still have a > 3.95 
>lb hammer). Anyone do this? Where'd you get a mold??
>?
> The handle should last forever.?
>?
>?
> bs?
>?
>?
> Tom Felts wrote:?
>> The biggest problem is that they distort very easily and have to be >> 
>"remolded" to a shape that you can use. I have also had some small dents >> 
>show up on my spinners.?
>>?
>> tom----but I still use the lead hammers.?
>>?
>>?
>> ---- Bob Spidell <bspidell@comcast.net> wrote: =============?
>> What's the problem with lead hammers? I've used them (4lb) for years >> with 
>no problems (kind of a waste of lead, though).?
>>?
>>?
>> Bob?
>?
> *******************************************************************?
> Bob Spidell San Jose, CA bspidell@comcast.net?
>?
> *******************************************************************?
> _______________________________________________?
> Support Team.Net http://www.team.net/donate.html?
>?
> Healeys@autox.team.net?
> http://autox.team.net/mailman/listinfo/healeys?
>?
> You are subscribed as fandy@sbcglobal.net?
>?
> http://www.team.net/archive _______________________________________________?
Support Team.Net http://www.team.net/donate.html?
?
Healeys@autox.team.net?
http://autox.team.net/mailman/listinfo/healeys?
?
You are subscribed as wilkmanracing@aol.com?
?
http://www.team.net/archive?
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>
  • [Healeys] Lead Hammer Molds, wilkmanracing <=