healeys
[Top] [All Lists]

Re: [Healeys] Transmission/overdrive issues.

To: healeys@autox.team.net
Subject: Re: [Healeys] Transmission/overdrive issues.
From: Norman Nock <sjnnock@sbcglobal.net>
Date: Tue, 25 Aug 2009 16:04:46 -0700 (PDT)
Dave Dougan Your noise is caused by a worn " sun wheel assembly " the gears
are worn .. if it gets worse pull trans. and fix it ... Norman Nock 
Check our web site 
www.BritishCarSpecialists.com
British Car Specialist2060 N Wilson WayStockton CA95205     209 948 8767 
--- On Mon, 8/24/09, Dave Porter <frogeye@porterscustom.com> wrote:

From: Dave Porter <frogeye@porterscustom.com>
Subject: Re: [Healeys] Transmission/overdrive issues.
To: "'David Dougan'" <daviddougan@comcast.net>, healeys@autox.team.net
Date: Monday, August 24, 2009, 8:04 PM

Likely the carrier bearing is failing or a spring post is broken. You ought
to remove it and inspect before further damage.
Dave

frogeye@porterscustom.com

Porter Customs   2909 Arno NE
Albuquerque, NM USA 87107
505-352-1378
1954 BN2  1959 AN5
Porter Custom Bicycles

cars:
 www.britishcarforum.com/portercustoms.html
gallery:
http://picasaweb.google.com/porterscustombicycles/PorterCustomBicyclesStuff

blog: http://porterbikes.com/


-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Richard Gordon
Sent: Monday, August 24, 2009 6:41 PM
To: healeys@autox.team.net
Cc: David Dougan
Subject: [Healeys] Transmission/overdrive issues.

Hi Gang,

This is being sent for Dave Dougan and replies should go directly to 
him at:
daviddougan@comcast.net.

Thanks, Richard

Transmission/overdrive issues.

I have a very noticeable "growling" coming from the area of the trans/
OD.  At first I thought it was noisy U-joints, but no.  The noise 
occurs when the OD dash switch is in the "normal" position and in any 
gear.  It goes away immediately when I move the switch to 
"overdrive" .  It is only the switch which makes the difference and 
not whether the OD has shifted into overdrive.  It sounds serious but 
may be only an adjustment.  The oil level has been OK even though I 
"topped it up" when I was troubleshooting.

I hope someone can shed some light on this problem.  Please let me 
know what you think and/or your experience.

Thanks,

Dave
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as frogeye@porterscustom.com

http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as sjnnock@sbcglobal.net

http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>