The shroud support is bent back about 15-20 degrees, and the bracket that
bolts/screws to the shroud is a bit different.
Bob Spidell -- San Jose, CA
---------------------------
"You know you're getting old when you stoop to tie your shoelaces and wonder
what else you could do while you're down there."--George Burns
----- Original Message -----
From: Editorgary@aol.com
To: healeys@autox.team.net
Sent: Friday, August 21, 2009 3:32:45 PM GMT -08:00 US/Canada Pacific
Subject: Re: [Healeys] Healeys Digest, Vol 3, Issue 584
In a message dated 8/21/09 2:44:05 PM, healeys-request@autox.team.net
writes:
>
> Can anyone help me with info, pictures, diagrams or dimensions of the bend
> in
> the shroud support to clear the cold air box. I don't want to guess.
> Thanks
> Ray Juncal
>
Recalling from memory here, but I beleive that the shroud support on the Le
Mans modifications was different from the original shroud support, or there
was an additional piece added to clear the cold air box.
Gary
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|