Is my math off, or is that a 100 amp fuse?
-----Original Message-----
I wanted to be able to run a 1200Watt 12 volt Dust Buster vacuum and figured
this calls for a heavy duty switch similar to the OD switch but 2-pole.
I have wires going from both the switched and unswitched hot ignition leads,
with an inline fuse between the source and the switch on each wire.
Steve Gerow
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|