Is there an overlapping edge of top material on the under side that would be
about 6" past where the metal would show through. i.e where the rear deck
anchors would be positioned?
Rich Chrysler
----- Original Message -----
From: "Quentin Schweninger" <quenty@wildblue.net>
To: "Healey List" <healeys@autox.team.net>
Sent: Saturday, August 15, 2009 2:35 PM
Subject: [Healeys] Top installation
> Hello all,
> Daisy is about 98% complete. The last big job is installation of the
> top.
> Last weekend I unpacked the top and started to slip the steel stiffner
> into the pocket across the back, only to discover that the whole pocket
> is glued shut, all the way across the back.
> This pocket is 4' long and 1-1/2" wide, with a slight curve.
>
> Another Screw up. Guess who?
>
> Jamming something thru will leave me with a bigger mess than I have Now,
> Any ideas?
> Dave and Daisy
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|