I have had an issue with a sticking throttle linkage fro a while. It seems
to be the bushings on the link located on top of the bell housing. I need to
get them rebushed. I need to use the tip of my shoe to pul the accelerator
pedal down at idle....Big hands, small place.....
Ira BT7
On Tue, Aug 11, 2009 at 11:07 AM, John Sims <ahbn6@verizon.net> wrote:
> Both are as tensioned as far as I can get them.
>
> John
>
> -----Original Message-----
> From: healeys-bounces@autox.team.net [mailto:
> healeys-bounces@autox.team.net]
> On Behalf Of Eric (Rick) Wilkins
> Sent: Tuesday, August 11, 2009 1:00 PM
> Cc: Healey List
> Subject: Re: [Healeys] Throttle? linkage
>
> The fatory throttle return springs on the shafts are completely
> adjustable by spinning one and retightening the retainer. There's
> usually no need to install an extra spring.
>
> Wilko
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as ahbn6@verizon.net
>
> http://www.team.net/archive
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as eyera3@gmail.com
>
> http://www.team.net/archive
>
--
I Erbs
Portland, OR
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|