Socket drives all use inches the world over.
On 8/3/09, Johnsen, Bernard F (AS) <bernard.johnsen@ngc.com> wrote:
> Folks -
> As we all know, the U.S.A. is one of the few (if not the only)
> country that has not adopted the Metric System. I am not trying to
> revive this particular religious war, but I was wondering about
> something. Over the years I have acquired a great many sockets and
> ratchets. They come in several "drive" sizes - quarter inch, three
> eighths inch, half inch, and three quarter inch. Does the rest of the
> world use these drive dimensions, or do they have comparable metric
> sizes - perhaps 10 MM drive or 15 MM drive ? Just wondering.
> Healey content: I use these sockets to work on my BJ8.
>
> - Bernie Johnsen 1967 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
>
--
Alan
'52 A90
'53 BN1
'64 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|