That's not the problem. It works like a charm. the problem is when I mount it
flush with the door, it is squeezed so much that it can't move. Loosening the
front knob allows it to move freely but then I have a loose lock. I have added
a rubber spacer under the front knob and now it works nicely. I was wondering
if there was a spacer under it originally.
Thanks
tom
---- 63ahbj7 <63ahbj7@comcast.net> wrote:
> <<A (small) shot of graphite powder into the key slot is perhaps
> better. Grease will eventually attract dust and dirt and get
> gunky--could stop the tumblers from falling properly. >>
>
> Bob is 1000% correct, Tom. Better take it apart & clean - again<G>!!
>
> Ed
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as tomfelts@windstream.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|