Cool ... the shrouds were TIG-welded, hand-finished with no filler required.
Pretty advanced stuff for the time, methinks.
Another one for the English<->American dictionary: Argonarc==TIG
bs
----- Original Message -----
From: "andy pole" <ampole@hotmail.com>
To: vern@srvinet.com, healeys@autox.team.net
Sent: Friday, July 24, 2009 8:21:32 AM GMT -08:00 US/Canada Pacific
Subject: Re: [Healeys] aluminum shroud
Vern
There has been alot of discussion if you search the archives: ie click on the
> http://www.team.net/archive on any email from the list and try searching
shroud welding etc, you will get plenty of info.
One material recommended is 0.063 inch thick 6061-T6 alloy for the shrouds,
some have tig and some gas welded, everyone will have an opinion.
And heres the link to the original jensen stuff:
http://www.users.bigpond.com/acmefluid/jensenweld.html
cheers Andy
You are subscribed as bspidell@comcast.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|