LOL.
It is a LBC - a Little Blasted Compressor.
Guy R Day
----- Original Message -----
From: "Jaap Aeckerlin" <j.aeckerlin@gmail.com>
To: <healeys@autox.team.net>; "Linwood H Rose" <linwoodrose@mac.com>
Sent: Friday, July 24, 2009 10:10 AM
Subject: Re: [Healeys] air compressor install
> Lin, a drip pan under your compressor? Is it made in Britain then?
> Jack Aeckerlin, The Netherlands
> 1964 BJ8 29432
>
> 2009/7/23 Linwood H Rose <linwoodrose@mac.com>
>
>> List,
>> Just want to say thanks to all who responded to my inquiry. All of your
>> comments were quite helpful, and appreciated.
>>
>> I am going to mount some adjustable shock absorbing feet on the bottom of
>> two pieces of 4 x 4 and then bolt the compressor to the wood 4 x 4. This
>> will allow me to be sure the unit is level, and I will be able to slide a
>> drip pan under the unit easily. Then I will turn it on and see if it
>> wants
>> to "walk." If it does, I will put a strap around it, but I will wait on
>> that
>> until I see what it happens.
>>
>> Again. Thanks everyone. I really did not want to drill the holes in the
>> floor! The purchaser's comments of this particular unit call it
>> especially
>> quiet, but I will reserve judgment until I see it in action.
>>
>> Lin
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>>
>> Healeys@autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> You are subscribed as j.aeckerlin@gmail.com
>>
>> http://www.team.net/archive
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as grday@btinternet.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|