Alan, I put a Facet type on my BN1 with a minimal fuss using the original
fittings, same size rubber tube will fit over the facet connections and the
flared metal tube used for the fuel line---had to push the pipes around just
a little when I did this as a roadside repair, but nothing so great that
strained any metal or wasn't completely reversible. Maybe not as tidy as
you would like for a permanent installation, but perfectly serviceable as a
temporary fix.
I drove around that way several months until I rebuilt the SU pump and put
it back on, no problems with the temporary fix or re-install.
Greg Lemon
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|