[Healeys] Answer for BJ8 rear seat

To:	<healeys@autox.team.net>
Subject:	[Healeys] Answer for BJ8 rear seat
From:	"Freese, Ken" <Kendall.Freese@Aerojet.com>
Date:	Wed, 1 Jul 2009 13:33:48 -0700

 I got the answer from the Concours Guide:
"On Phase I BJ8s there were two
of these screws per side. This continued into the Phase II BJ8s, and it
appears that only one
screw per side was used, starting with the introduction of separate turn
indicator lights
(front and back - in 1966)."

Ken Freese
65 BJ8 Phase II (late suspension)
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread]	Current Thread	[Next in Thread>
[Healeys] Answer for BJ8 rear seat, Freese, Ken <= Re: [Healeys] Answer for BJ8 rear seat, John Vrugtman

Previous by Date:	Re: [Healeys] paint and interior, Rich C
Next by Date:	Re: [Healeys] BMC AM Radio, dwflagg
Previous by Thread:	[Healeys] BJ8 rear seat vertical wood question, Freese, Ken
Next by Thread:	Re: [Healeys] Answer for BJ8 rear seat, John Vrugtman
Indexes:	[Date] [Thread] [Top] [All Lists]